Industry News
The phenomenon, causes and solutions of the laser marking machine getting stuck1.Card drop phenomenon: 1.1 After opening the software, it prompts that the USB dongle cannot be found.1.2 The software will open and prompt that no valid LMC device is found; 1.3 When running this software, it freezes,
2025/07/11 17:45
To be used for: Marking the required text, patterns, barcodes and other graphics on plastics, electronics, metals, ceramics, tobacco and other materials. Laser marking technology has led domestic companies to enter the laser processing industry. Especially after fiber lasers were widely used in
2025/07/11 17:42
The portable handheld laser marking machine is an optoelectronic and computer-integrated device that integrates laser, optical, mechanical, electronic and computer technologies. It uses a high-energy laser beam to irradiate the surface of the workpiece, causing the formation of surface dirt, rust
2025/07/11 17:32
A laser marking machine is a high-tech modern technological device. The application scope of this equipment is quite wide. The laser marking machine can mark many words on various electronic components, building materials, etc. However, when using this equipment, some malfunctions may occur, such
2025/07/11 17:24
1. Use the defocus mark to indicate a specific range of content. As a manufacturer of fiber laser marking machines, since each focusing lens has a corresponding depth of focus range, and the defocusing method can easily result in the formation of large-scale marking patterns, the edges located at
2025/07/11 15:21
There are many reasons why the handheld laser cleaning machine has attracted much attention. Firstly, traditional cleaning methods usually require the use of chemical solvents or mechanical stirring to remove dirt and surface coatings. These methods may pose threats to the environment and human
2025/07/10 17:03
Every year, tire manufacturers around the world produce billions of tires. During the production process, the cleaning of tire molds is fast and reliable to save downtime. Traditional cleaning methods include sandblasting, ultrasonic waves or carbon dioxide cleaning. However, laser cleaning
2025/07/01 17:39
The laser marking machine device is usually composed of several parts: the laser source, the lighting system, the cooling system, and the control system. Depending on the type of laser used, it can be classified as C02 laser, Nd:YAG laser, etc. For the surfaces of general metals and dark plastics,
2025/06/23 18:33
In recent years, laser welding machines have gained widespread popularity in the mechanical manufacturing industry due to their advantages such as no deformation during welding, minimal heat influence, high welding efficiency, and aesthetically pleasing welds. Although they have many benefits,
2025/06/23 18:30
Fiber laser marking machines are mainly used for processing metal materials. What factors can affect the efficiency of the laser marking machine? The factors influencing marking efficiency can be classified as equipment hardware configuration, software settings, and processing materials, etc.
2025/06/23 18:23
A laser welding machine, also known as a laser welding machine and laser welding equipment, is a machine used for processing laser materials. Laser welding involves using high-energy laser pulses to locally heat the material in a small area. The energy of the laser radiation spreads into the
2025/06/23 18:20
As the hot summer approaches, the temperature gradually rises. The working intensity of the personnel operating the laser welding machine is also increasing slowly. According to the statistics of failure rates in previous years, summer is a season with higher failure rates. The data shows that the
2025/06/23 18:05